Elitegroup G732 (V2.0) - Manual (Page 83)

"Next" button.
6. Select the "Specify a location" and click the "Browse" button to locate the disk
drive of your DVD-ROM driver.
D:\Driver\MiniPCI\Actiontec\Wireless\WinXP to proceed with the installation.
Installing the Accton Combo/Wireless LAN Driver for WinXP
1.
2.
3.
4.
5.
6.
Click the "My Computer" icon and click on the "Control Panel" item to open the
Control Panel.
Double click on the "System" icon. Click the "Device Manager" tab.
Click on the "Other Devices" (denoted by the yellow mark symbol), select the
"Network Controller" and click on the "Properties" tab.
From the "Network Controller Properties" window, click on the "Driver" tab and
select the "Update Driver" button.
Click on the "Specify the location of the driver (Advanced)" and again click on the
"Next" button.
Select the "Specify a location" and click the "Browse" button to locate the disk
drive of your DVD-ROM driver.
D:\Driver\MiniPCI\Accton\wireless to proceed with the
installation.
Installing the Actiontec MiniPCI Combo Card Modem Driver for
WinXP
1.
2.
3.
4.
5.
Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive.
Click “Start” and Select “Run”.
Type the following: D:\Driver\MiniPCI\Actiontec\Modem\WinXP\Setup.exe (If D
is not your CD-ROM/DVD-ROM drive, substitute D with the correct drive letter).
Click on “Setup” to begin the Installation Wizard.
Follow the Wizard’s on-screen instructions to complete the installation. Restart the
system.
71