Elitegroup G732 (V2.0) - Manual (Page 63)

Disabled, 2 Sectors, 4 Sectors, 8 Sectors, 16 Sectors (default
value)
LBA Mode Control
When enabled, this option uses 28-bit addressing of he hard drive without regard for
cylinders, heads, and sectors.
Note that Logical Block Access may decrease the access speed of the hard disk.
In order to make changes to this field, the Type field must be set to User.
Configuration options are:
Disabled, Enabled (default value)
32 Bit I/O
When enabled, this option speeds up communication between the CPU and the IDE
controller. This option supports PCI local bus only. ISA bus is not supported. Set
the Type field to Auto to provide the optimum transfer mode. Configuration options
are:
Disabled, Enabled (default value)
Transfer Mode
When enabled, this option speeds up communication between the system and the
IDE controller by using enhanced I/O transfer modes (PIO) Modes.
Set the Type field to Auto to provide the optimum transfer mode. Configurations are:
Standard, Fast PIO 1, Fast PIO 2, Fast PIO 3, Fast PIO 4, FPIO 3
/ DMA 1, FPIO 4 / DMA 2
Ultra DMA Mode
When enabled, this option speeds up data transfer to and from the drive. In order to
make changes to this field, the Type field must be set to User.
51