Loading a disc – Elitegroup G732 (V2.0) User Manual

Page 41

Advertising
background image

Store discs in a cool dry place not to damage the disc.

Do not use benzene, thinners, or cleaners with detergent. Only use DVD-ROM
cleaning kits.

Do not bend or drop the discs.

Loading a Disc

To play a CD disc, follow the instructions listed below.
1.

2.

3.

1.

2.
3.

Push the DVD-ROM/Combo eject button on the CD drive door. Gently pull the
tray all the way out.
Carefully lift the DVD-ROM/Combo by the edges and make sure the shiny surface
is face down (the side with no writing on it). Carefully insert the DVD-ROM onto
the tray. Push the DVD-ROM down gently so that it snaps onto the center ring.
Push the tray back into the drive.

To remove a disk, do the following:

Check the LED display and make sure that the computer is not accessing the DVD-
ROM drive.
Push the eject button and pull the tray all the way out.
Carefully pick up the CD disk by the edges and – while pressing down on the center
ring – remove the DVD-ROM/Combo from the tray.

29

Advertising