Elitegroup G732 (V2.0) - Manual (Page 84)

Installing the Modem AM303W Driver for WinXP
1.
2.
3.
4.
5.
6.
7.
From your screen, click on the “My Computer” icon and use your mouse or
touchpad right button to select the “Properties” item.
Click on the “Hardware” tab from the “System Properties” dialog window.
Double click “Device Manager” tab.
Select the “PCI Modem” in the “Modem” group (denoted by a yellow mark symbol).
Click the “Driver” tab then click the “Update Driver” item.
Select the “Search for a suitable driver for my device (recommended)” item and
click “Next”.
Click the “Browse” button and specify for the designate location of your CD driver.
(D:\Driver\MiniPCI\AM303W\WinXP).
Installing the Accton Combo/AC-link MODEM Driver for WinXP
1.
2.
3.
4.
5.
6.
Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive.
Click “Start” and Select “Run”.
Type the following: D:\Driver\MiniPCI\Accton\Modem\WinXP\Setup.exe (If D is
not your CD-ROM/DVD-ROM drive, substitute D with the correct drive letter).
Click on “Setup” to begin the Installation Wizard.
Follow the Wizard`s on-screen instructions to complete the installation.
Restart the system.
VGA Utilities
After you have restarted Windows, open the “Control Panel” and double click on the
“Display” icon. From the “Display Properties” window, select the “Settings” tab and
click on the “Advanced” tab to enter the “Default Monitor and MOBILITY RADEON
8500 Properties" window.
72