Elitegroup G732 (V2.0) - Manual (Page 82)

Manual Installation
To install the driver manually, follow the step-by-step procedures described on each
individual section for a more clear installation.
Installing the CardBus Driver for WinXP
Please follow these instructions to install the cardbus driver:
1.
2.
3.
4.
5.
6.
From Start, click on the "My Computer" icon and click the "View System
Information".
Click on the "Hardware" tab from the "System Properties" dialog window.
Click the "Device Manager" button.
Double click on the "PCMCIA adapters" , double click the "Generic CardBus
Controller" and click on the "Driver" tab.
Click the "Update Driver" tab and select the "Install from a list or specific location
(Advanced)" item and click "Next".
Select the "Include this location in the search" item and click on the "Browse"
button and specify for the designate location of your CD driver
D:\Driver\Cardbus\ENE1410\WinXP to proceed with the installation.
Installing the Actiontec Combo/Wireless LAN Driver for WinXP
1.
2.
3.
4.
5.
Click the "My Computer" icon and click on the "Control Panel" item to open the
Control Panel.
Double click on the "System" icon. Click the "Device Manager" tab.
Click on the "Other Devices" (denoted by the yellow mark symbol), select the
"Ethernet Controller" and click on the "Properties" tab.
From the "Ethernet Controller Properties" window, click on the "Driver" tab and
select the "Update Driver" button.
Click on the "Specify the location of the driver (Advanced)" and again click on the
70