Elitegroup G732 (V2.0) - Manual (Page 74)

[Yes] [No]
Select Yes to save changes and exit the BIOS setup program or press [Esc] to return
to the Exit menu.
The next time you bootup the Notebook, the BIOS will attempt to load the values
you saved in Non-Volatile memory. If these values cause the system boot to fail,
reboot and press [F2] to enter the Setup program.
Once in Setup, you can try to change the values that caused the system boot to fail.
If the problem persists, load the default values as described below.
NOTE: If you attempt to exit the Setup program without saving your changes,
the program will prompt you with a message asking if you want to save your
changes before exiting.
Exit Discarding Changes
This option should only be used if you do not want to save the changes you have
made to the Setup program. If you have made changes to the fields other than
system date, system time and password, the system will ask for confirmation when
choosing Exit Discarding Changes.
Warning
Configuration has not been saved!
Save before exiting?
[Yes] [No]
Select Yes to save changes and exit the BIOS setup program, select No to exit BIOS
without saving your changes, or press [Esc] to return to the Exit menu.
62