Nature Power Solar Pathway Light (21070 ) - Manual

Solar Pathway Light
21070
Instruction Manual
Features
 2 LEDs per unit
 Up to 8 Hours of Runtime on a full charge
 No Wiring Required
 Weather Resistant
 Automatic sensor turns the light on at dusk
 Includes Rechargeable Solar batteries
Location of the Solar Pathway Light
For best result, position the Pathway Light where it can
get direct sunlight, and is free from cover and shade. (As
shown in figure 1). The Solar Pathway Light should be
left to charge for 2 sunny days before initial use.
Installation Instructions
1) Carefully remove all the fittings from the box.
2) Find a suitable location for the Solar Pathway Light
3) Screw in position by “fixing bracket with 2 provided screws (as shown in figure 2)
4) Assemble Solar Pathway Light to fixing bracket by turning it clockwise (as shown in figure 3)
Operation
1) Press the switch to “AUTO” position (As show in Figure 4), it will automatically
turn the unit at dusk.
2) The performance of the Solar Pathway Light will vary during the time of year.
The light will deliver more brightness and duration of light when it has had a full
day in the sun rather than a day in cloudy or overcast weather.
Replacing the Batteries
For best results Ni-Mh batteries should be replaced every 12 months.
1) Release the screw on the back of the unit (as shown in figure 5)
2) Remove the old battery. Make sure the new battery is high quality Ni-Mh AA
rechargeable battery.
3) Install the new battery in to the battery compartment, ensuring the correct
polarity is observed.
4) Reassemble the unit by replacing the back cover.