Seca 376 - Manual (Page 53)

seca 360° wireless Network • 53
English
5. Select the menu item "lrn" (learn) in the "rf" sub-
menu.
6. Confirm the selection.
The wireless group currently selected (here:
wireless group 0 "ID 0") is displayed.
If the wireless group "0" already exists and you wish
to set up another wireless group with this device,
use the arrow key to select another ID (here: wire-
less group 1 "ID 1").
7. Confirm your selection for the wireless group.
The device will suggest a channel number for
channel 1 (here C1 "0").
You can either accept the channel number sug-
gested or select another channel number using the
arrow key.
8. Confirm your selection for channel 1.
The device will suggest a channel number for chan-
nel 2 (here C2 "30").
You can either accept the channel number sug-
gested or select another channel number using the
arrow key.
NOTE:
Two-digit channel numbers are displayed with-
out a space. The display "C230" means: chan-
nel "2", channel number "30".
9. Confirm your selection for channel 2.
The device will suggest a channel number for
channel 3 (here C3 "60").
You can either accept the channel number sug-
gested or select another channel number using the
arrow key.
10. Confirm your selection for channel 3.
The message
StOp
appears in the display.
The device is waiting for signals from other equip-
ment devices with radio transmission capability
within its range.
NOTE:
With certain devices a special switch-on proce-
dure has to be followed if they are to be inte-
grated in a wireless group. Consult the user
manual for each device.