Triton RL2000 User Manual - Manual (Page 29)

25
C
ASSETTE
C
LOSE
/ C
ASH
R
EPLENISHMENT
2. To remove the note tray, grasp the tray handle and slide the tray out of the mechanism. Place note tray
on a flat level surface.
Removing note tray from the dispensing
mechanism.
3. Remove any rejected notes. The reject compartment is located nearest the handle side of the tray.
Removing rejected notes.
R
EPLENISH
C
ASSETTE
M
ECH
10 (M
INI
M
ECH
)
1. Unlock and open the security cabinet door.
Note: You may wish to record the number of notes removed from the reject compartment for use when
balancing the note tray against the cassette/day close records.
L
OADING THE
N
OTE
T
RAY
1. Move the pusher plate to the rear of the tray (toward the handle). Ensure the pusher plate is fully back.
Maintain pressure on the pusher plate as needed while loading notes.
2. Count the number of bills that remain in the cassette, if any. Next, count the number of bills that are
being added into the cassette.
3. Add the number of bills being placed into the cassette
to the number that remained. The “Total” number of
these bills will be entered in the “E
NTER C ASSETTE
Q UANTITY ”
option.
Load note tray with currency.