Delmhorst Instrument TotalCheck - Manual (Page 16)

Copyright  2006, Delmhorst Instrument Co.
Page 16 of 32
2. The meter will begin taking readings. As a default setting the RH reading will be
the most prominent on the screen. If you would like to make another variable
(temperature, GPP/GPK or dew point), the prominent reading, use the  and
 keys to highlight your selection. Press the SELECT key to choose that
variable.
MAIN MENU OPTIONS:
STORAGE:
The Storage Menu groups all meter features related to measurement storage, retrieval
and manipulation. All operations on stored readings may only be performed on a single
job.
1. While in the ENHANCED main menu, use the  keys to highlight option #4
STORAGE.
2. Press the SELECT key to enter the storage sub menu. There are four available
selections in this menu as shown below:

View Statistics:
This menu option selects the meter’s statistical analysis option. Selecting this option
gives the user access to two sets of statistical data. A screen shot example of the
first set is shown below:

The first line indicates the Moisture Content (MC) job being analyzed.

The second line shows the number of readings stored in the specific job

The third line shows the Average MC value for all stored readings in the specific
job.

The fourth line shows the Standard Deviation for the specific job.