GW Instek GSP-830 User Manual - Manual (Page 129)

SYSTEM
129
View system configuration
Panel operation 1. To check system
configuration, press the
System key.
System
2. Press F6 (More).
More... F 6
3. Press F4 (System Config On).
System Config
On Off
F 4
4. The system configuration appears. Four types of
information are listed.
•
Serial number
•
Software/hardware/firmware/language version
•
Installed optional items
•
Reference signal selection status
Serial Number
Software/
Hardware Version
Optional Item
Installation Status
Reference Signal
Status
Language Version
5. To close the configuration,
press F4 again (System
Config Off).
System Config
On Off
F 4
Serial number The serial number for device
identification. This number is
necessary for various service level
operations. The same number is
pasted on the rear panel.
Software/hardware
language version Shows versions and release date of hardware, software,
firmware, and language database. Used for service level
operations.