GW Instek GSP-830 User Manual - Manual (Page 64)

GSP-830 User Manual
64
Activate all 5 normal markers at once
1. Press the Marker key.
Marker
Panel operation
2. Press F6 (More).
More F 6
3. Press F3 (All Mkrs On) to turn
On all 5 normal markers.
All Mkrs
On Off
F 3
4. To view all marker status, press
F2 (Marker Table On). The
frequency and the amplitude of
the markers appear in table list.
Marker Table
On Off
F 2
Display The marker table shows all 5 marker frequencies and
amplitudes.
Activate delta marker
1. Press the Marker key.
Marker
Panel operation
2. Press F1 (Marker) repeatedly
to select the marker ID from 1
to 5.
Marker
1 2 3 4 5
F 1
3. Press F2 (On) and turn on the
selected marker.
On Off F 2
4. Make sure ∆Mkr is selected in
F3. If necessary, press F3 and
select ∆Mkr.
5. Repeat the above steps for the
number of markers required.
Display The upper right corner of the display shows the active
delta marker pair.