GW Instek GSP-830 User Manual - Manual (Page 140)

GSP-830 User Manual
140
5. Press F6 (Return) to go back
to the previous menu.
Return F 6
3. Stop editing 1. Press F5 (Stop Edit).
Stop Edit F 5
2. The Start Edit sign in the
display mid-right turns off.
Start Edit
4. Save the edited
sequence
1. Press F6 (More).
More F 6
2. Press F2 (Save). The sequence
is saved.
Save F 2
3. Press F6 (Return) to go back
to the previous menu.
Return F 6
Delete all sequences
Panel operation 1. Press the Sequence key.
Seq
2. Press F5 (Delete Seq All).
Delete
Seq All...
F 5
3. Press F2 (Yes) to confirm, or
F1 (No) to cancel. All 10
sequences will be deleted.
No F 1
Yes F 2
4. To go back to the previous
menu, press F6 (Return).
Return F 6
Note Delete Seq All cannot be recovered – the Undelete
function is not applicable.
Run Sequence
This section assumes that editing the sequence is completed.
1. Select
sequence
1. Press the Sequence key
Seq
2. Press F1 (sequence 1 to 5) or
F2 (sequence 6 to 10)
repeatedly to select the
sequence.
Select Seq
1 2 3 4 5
F 1
Select Seq
6 7 8 9 10
F 2