GW Instek GSP-830 User Manual - Manual (Page 6)

GSP-830 User Manual
6
S
AFETY INSTRUCTIONS
This chapter contains important safety instructions that
you must follow when operating the GSP-830 and when
keeping it in storage. Read the following before operating
this instrument to ensure your safety and to keep the
GSP-830 in best condition.
Safety Symbols
These safety symbols may appear in this manual or on the GSP-830.
WARNING
Warning: Identifies conditions or practices that could
result in injury or loss of life.
CAUTION
Caution: Identifies conditions or practices that could
result in damage to the GSP-830 or to other properties.
DANGER High Voltage
Attention Refer to the Manual
Protective Conductor Terminal
Earth (ground) Terminal
Safety Guidelines
General Guideline
CAUTION
•
Make sure that the RF input level and the Tracking
Generator output reversed power level do not exceed
+30dBm.
•
Do not supply an input signal to the Tracking Generator
output.
•
Do not place any heavy object on the GSP-830.
•
Avoid severe impacts or rough handling that leads to
damaging the GSP-830.
•
Do not discharge static electricity onto the GSP-830.