GW Instek PEL-2000 Series User Manual - Manual (Page 175)

OPERATION
175
Configuring Step Resolution
Background The CC, CV and CR step resolution settings can be
edited in the configuration menu. The minimum
and maximum step resolution of each channel is
dependent on the load module. For more
information on step resolution see page 81.
Parameters Minimum* Maximum* Unit
CCH Step HR/4000 HR/2 Amperes A
CCL Step LR/4000 LR/2 Amperes A
CRH Step HR/4000 HR/2 Siemens
℧
CRL Step LR/4000 LR/2 Siemens
℧
CV Step HR/4000 HR/2 Voltage V
* HR = High range, LR = Low range
Panel operation Ensure the menu is the configuration
menu. See page 160.
1. Press the F2(Other) key to enter
the Other menu.
03/02/09
10 : 30
CC
Dyna
High
Configure
Previous
Menu
Protection Go-NoGo
CH1
Other
S
Ω
Ω
Conf