GW Instek PEL-2000 Series User Manual - Manual (Page 43)

GETTING STARTED
43
Load Connections
Precautions and Procedures
Intoduction The PEL-2000 load generator supports a number of
different load configurations for flexible operation.
 Single DUT, single load
 Single DUT, parallel load
 Multiple DUTs, multiple loads
 Multiple DUTs, multiple mainframe loads
 Single DUT, parallel mainframes
 DC loads
 Low voltage connections
The PEL-2000 also supports a number of different
control methods and interfaces. The connections
used are described here:
 Frame link
 Channel control
 Go/NoGo
Wire Gauge
considerations Before connecting the PEL-2000, wire gauge must
be taken into account. Load wires must be large
enough to resist overheating when a short-circuit
condition occurs as well as maintain a good
regulation. The size, polarity and length of a wire
are all factors in determining if a wire will
withstand short circuiting.