GW Instek GDM-8200A User Manual - Manual (Page 13)

GETTING STARTED
13
COM Terminal Accepts ground (COM) line in all
measurements except the sense line in
4W Resistance (page30).
Voltage/ 2W Ω /
(Diode)
Terminal
Accepts input in all measurements
except for DC/AC Current and 4W
Resistance sense line.
Current Terminal Accepts DC/AC Current input.
For DCI/ACI details, see page28.
Output On/Off
key Turns the display on or off. When the
display is turned off, all panel keys
except the Output On/Off key become
disabled. The Output On/Off key is On
by default.
Measurement keys (Upper row)
SHIFT/EXIT As the Shift key, selects the second
functionality assigned to each front
panel key. When pressed, the
indicator appears in the display.
As the Exit key, gets out of the
parameter configuration mode and
goes back to the measurement result
display mode.
ACV Measures AC Voltage (page24).
SHIFT → ACV
(SCAN) Starts the optional scan measurement
(page80).
DCV Measures DC Voltage (page24).