GW Instek GDM-8200A User Manual - Manual (Page 28)

GDM-8200A Series User Manual
28
AC/DC/AC+DC Current Measurement
Current type AC 0 ~ 10A
DC 0 ~ 10A
AC+DC 0 ~ 10A
AC 2 +DC 2 *AC+DC=
(AC = true RMS)
1. Activate ACI/
DCI Press the ACI (AC Current) key or
the DCI (DC Current) key. or
For AC+DC Current, press the ACI
key and the DCI key together.
2. ACI/DCI mode
display appears
AC(DC) + A Indicates AC, DC, AC+DC Current
(Note: AC = true RMS)
AUTO Indicates Automatic range selection
10A 2nd display shows the Current range
3. Connect the
test lead and
measure Connect the test lead
between the A and COM
port or LO to COM port,
depending on the current.
For current ≤ 2A* use the
LO port; For current up to
10A use the A port. The
display updates the reading.
*2A (GDM-8255A, 1.2A
GDM-8251A)
A
COM
LO
MAX
2A