GW Instek GDM-8200A User Manual - Manual (Page 48)

GDM-8200A Series User Manual
48
Hold Measurement
Applicable to
( ) + ( ) +
Background Hold measurement retains the current measurement data
and updates it only when the reading fluctuates more than
the threshold setting as the percentage of the retained data.
1. Activate
Hold
measurement Press the HOLD key.
2. Hold
measurement
display
appears
HOLD Indicates Hold measurement
2nd display Shows the Hold threshold
1st display The measurement data which is updated only
when it fluctuates more than the threshold
compared to the retained value.
3. Select hold
threshold Select the hold threshold
using the Up/Down key. The
2
nd display changes
accordingly.
Range 0 ~ 99%, 1% resolution
Deactivate
Hold
measurement To cancel the Hold
measurement, press the Hold
key for 2 seconds, or simply
activate another
measurement.