Jenway 6285 - Manual (Page 18)

5. To set or change the locking code, press the down arrow key to select
LOCKING CODE , then press the enter key.
6. Adjust the highlighted digit using the up or down arrow keys, then select the
other digits using the right or left arrow keys. Adjust each in turn until the code
of your choice is displayed. Press the enter key to confirm this, ensuring that
you can remember the number selected.
7. All methods are now locked against adjustment to the set parameters and a
padlock icon will be displayed at the top of the method settings to indicate
this. It is not possible to move between methods.
8. Access to the locking code from the instrument setup menu will now require
the entry of the locking code first.
9. To exit the INSTRUMENT SETUP menu use the up or down arrow keys to
highlight EXIT, then press the enter key. To set additional parameters
continue as detailed in the following text.
Language
1. Press the down arrow key to move the highlight to LANGUAGE and then
press the enter key.
2. Use the up or down arrow keys to view the alternative languages available
(English, Spanish, Italian, German or French).
(15)