Jenway 6285 - Manual (Page 36)

Section 15
Specification & Data
10.1 Technical Specification
Specification 6270 6280 6285
Light source Pulsed Xenon Lamp with press-to-read operation
Expected Lifetime No replacement required in normal operation
Sensitivity (Quinine Sulphate) 1µg/ml <1ng/ml <1ng/ml
Dynamic Range (Quinine
Sulphate) 5.2x 10 4 5.2 x 10 6 5.2 x 10 6
Detector Photodiode Photomultiplier Photomultiplier
Wavelength Range 190 to 1100nm 190 to 650nm 190 to 850nm
Wavelength Selection Intelligent Filter Modules (IFM)
Raw Fluorescence a a a
Calibration Blank + % Blank + % Blank + %
Concentration a a a
Calibration Blank + up to 6
standards
Blank + Up to 6
standards
Blank + up to 6
standards
Kinetics (Timed Readings) In both above
modes
In both above
modes
In both above
modes
Time Limits 1 reading every 3 to 999 seconds
Methods Stored 20 20 20
Results Stored 100/method 100/method 100/method
GLP Method lock with password access
Time and date stamped results
Last calibration date and time stored
Calibration Interval set
Calibration due reminder
User ID
Outputs RS232 Serial Port
PC Software Compatible with DataWay (option)
Sample Handling 10mm Square cuvette holder (standard)
Heated Sample Holder (Option)
Sipper Pump (Option)
Power Supply 90 to 230Vac universal mains adapter
12Vdc input (cigarette lighter cable and battery pack options)
Size 365(w) x 272 (d) x 160(h) mm
Weight 6Kgs
(33)