KANOMAX 3910 Portable Particle Counter Software Manual - Manual (Page 10)

9
3. Remote Console Software
3.2. Menu List
File Menu
[Exit] Closes the software.
Help Menu
[About] Views the software version information.
3.3. Destination Settings and Command Buttons
（Refer to 3.1. Main Screen.）
Host Name
Enter the Host Name for the instrument you wish to connect with. The instrument’s Host Name is
configured in the instrument’s COMMUNICATION SETTING.
You can also choose a Host Name by using [Search] which will display all the instruments currently
connected to the LAN (Refer to 3.5. Search Function).
Connect
Click [Connect] to connect to the instrument configured in Host Name.
The “Authentication” window will be displayed, prompting you to enter your User ID and Password.
Enter your User ID and Password that that you use to log into the instrument and click [OK]. If the
authentication succeeds, the connection will be established.
NOTE: In order to access the instrument remotely the user must have [Administrator] or [Remote Control]
rights. Also, the instrument cannot be accessed remotely via PC if it is remote mode.
If the connection fails, a message will be displayed saying “The connection was ended because of a network
error.”
To reconnect to the instrument, click [Connect].
If the connection succeeds, the instrument screen will be displayed, and the [Connect] button will be
replaced by the [Disconnect] button.
Search
Starts a search for connected instruments (Refer to 3.5 Search Function).
EXIT
Closes the software.