KANOMAX 3910 Portable Particle Counter Software Manual - Manual (Page 47)

46
7. Users Management Software
・Upload
To upload user data from a PC to an instrument click the
[X] button on the user list window, to display the “File
Transfer” window. (NOTE: The file transfer screen will
only appear if you have registered a new user or edited an
existing user. Otherwise you will be returned to the main
screen when you close the user list window.)
Enter the Host Name of the instrument you wish to
connect with, and click [Connect].
If you can not connect to the instrument by entering
the Host Name, click [Search]
to check if the instrument is connected to the LAN.
(Refer to 3.5 Search Function.)
The “User Authentication” window will
be displayed.
Enter a User ID and Password with administrative
rights or [Copy Files] rights as registered in the
instrument.
Click [OK] to authenticate the user. When the
connection is completed, the user data list
in the PC will be displayed.
Select a file,
and click [Upload]
to start uploading.
When the upload is finished,
the message “The file has finished uploading”
will be displayed.
Click [OK].