KANOMAX 3910 Portable Particle Counter Software Manual - Manual (Page 11)

10
3. Remote Console Software
3.4. How to Operate the Remote Console Software
.
After the computer is successfully connected to the instrument, the instrument screen will be displayed on
the computer.
Click the buttons on the display to operate the instrument as described in the instrument’s instruction
manual.
Due to LAN communication lag, there may be a slight delay before the instrument reacts to your
commands.
If the computer becomes unresponsive for a minute or longer, it may be disconnected or a problem
may have occurred with the LAN communications. If that is the case, close the software by clicking
[Exit]. Check the LAN communications and restart the software.
NOTE: If the instrument is put in remote mode while you are using the “Remote Console Software”,
communications between the instrument and PC will be terminated. The instrument should only be
placed in remote mode when using the “Measuring Software” program.
Operation Screen