KANOMAX 3910 Portable Particle Counter Software Manual User Manual
Page 29
28
6. Measuring Software
6.6. Remote Measurement Data Display
6.6.1. Data Display Format
The following table shows the display formats used by the Particle & THVP Graphs:
Unit Display
Format Example
Particle
p, p/cf, p/m
3
<10000 : XXXX
≧10000 : X. XXXE + X
2568
1.256E + 5
Temperature
deg C, deg F
XXX. X
26.5
Humidity %
XXX.
X
75.3
Air Velocity
m/s, FPM
X. XXX
0.652
6.6.2. Particle Graph
To display the particle graph, go to [View] -> [Time Series Graph] -> [Particle] or click on the tool bar.
1) Particle Graph Window
Graphs are available with two types of vertical axis; linear and logarithm.
In the above windows, you can scroll the graph using the scroll bars. If you move the cursor over the graph it
will change to a red bar. As you position the bar over a particular time (shown on the X axis), the particle count
shown at the bottom of the graph will update to reflect the measurement data under the bar’s current location
While a measurement is in progress, the graph cursor functionality and the scroll bars are disabled.
Particle Graph (Linear)
Particle Graph (Logarithm)
Data for each particle size will be
displayed in the order of
0.3µm, 0.5µm, 1µm, 3µm, 5µm and 10µm