KANOMAX 3910 Portable Particle Counter Software Manual - Manual (Page 15)

14
4. Scheduler Software
4.4. Schedule File Creation
4.4.1. Creating a new file
(1) Click [File] -> [New], or
Click [New].
(2) The “New Schedule” window will be displayed.
Enter a Schedule name and specify a MAP File to load. To
select a MAP File click [Ref] to display the “Select MAP
File” window and click the file that you wish to use.
Without a MAP file, you cannot create a Schedule with this
application.
* Creating a MAP File: You may use any standard paint
program (such as MS Paint) to create a visual
representation of the measurement area(s) where you will
be using the instrument. The Scheduler Software can use
any standard bitmap (.bmp) file up to a maximum size of
1600 × 1200 pixels.
Click [OK] to return to the main screen and input the test
locations. Click [Cancel] to return to the main screen.