KANOMAX 3910 Portable Particle Counter Software Manual - Manual (Page 12)

11
3. Remote Console Software
3.5. Search Function
Click [Search] to find instruments connected to the LAN.
Click [Search]
If a connected instrument is found, it will be listed in the “Search Sensors” window shown above.
Select the instrument that you want to connect with and click [Set]. The name of the instrument selected will
be displayed on the Remote Console Software，File Transfer Software or User Management Software.
If you know the Host Name and the IP address of an instrument,
click [Manual] to open the dialog box shown on the right.
Enter the Host Name and IP address of the instrument,
and click [OK].
The instrument will be added to the “Search Sensors” window
and an “m” will appear to the left of the Host Name,
as shown below.
To delete Host Name and IP Address which were manually
input, select the instrument that you want to delete and click
[Delete].
[Manual] and [Delete] are disabled while searching. To enable
[Manual] and [Delete], click [Stop] to finish searching.
Click [Exit] to close the search function and return to the previous screen.