KANOMAX 3910 Portable Particle Counter Software Manual - Manual (Page 7)

6
2. Installation
2. Installation
2.1. Installation
When installing the software, be sure to log in with a user that has administrative rights and follow the
procedure below.
Insert the product CD-ROM into the CD-ROM drive.
This operation can be started from the Windows Explore menu.
(1) Using Windows Explorer, find and double-click the setup.exe file located in the “English” folder
on the product CD-ROM.
(2) Follow the instructions displayed on the screen.
(3) When the installation is completed successfully, a “KANOMAX” folder will be added to the
“(All) Programs” list in the “Start” menu.
2.2. Starting and Closing a Program
To Start the PARTICLE COUNTER Remote Console Software:
From the start menu, click: [(All) Programs] -> [KANOMAX] -> [LPC3910]-> [Remote Console
Software].
The main window of the software will be displayed.
To Start the PARTICLE COUNTER Scheduler Software:
From the start menu, click: [(All) Programs] -> [KANOMAX] -> [LPC3910]-> [Scheduler Software].
The main window of the software will be displayed.
To Start the PARTICLE COUNTER File Transfer Software:
From the start menu, click: [(All) Programs] -> [KANOMAX] -> [LPC3910]-> [File Transfer software].
The main window of the software will be displayed.
To Start the PARTICLE COUNTER Measuring Software:
From the start menu, click: [(All) Programs] -> [KANOMAX] -> [LPC3910]-> [Measuring Software].
The main window of the software will be displayed.
To Start the PARTICLE COUNTER User Management Software:
From the start menu, click: [(All) Programs] -> [KANOMAX] -> [LPC3910]-> [User Management
Software].
The main window of the software will be displayed
To close the software:
- From the [File] menu, select [Exit], or
- Click the [x] button located at the right end of the title bar of the main window.