ADTRAN 600 Series - Manual (Page 24)

Total Access 600 Series User Manual © 2002, ADTRAN, Inc.
Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B
Page 24
Status
This displays the current status of the time negotiation process. If an error is displayed, check all connections
and configurations to try to resolve the problem.
System Utility
Use the 6 <67(0 8 7,/,7< menu to view and set the system parameters shown in Figure 5.
Figure 5. System Utility Menu
>Upgrade Firmware
Updates firmware when TA 600 enhancements are released. Two transfer methods are available for use in updating
the Total Access 600 system controller.
Transfer Method
The two methods for upgrading are
;02'(0 and 7)73 (See Appendix A. Updating Total Access 600
Firmware using XMODEM on page 54 and Appendix B. Updating Total Access 600 Firmware using TFTP
on page 57 for more information.)
7)73 requires a TFTP server running somewhere on the network. The
Total Access 600 starts a TFTP client function which gets the upgrade code from the TFTP server. Selecting
;02'(0 will load the upgrade code through the
&5$)7 port using any PC terminal emulator with xmo-
dem capability.
TFTP Server Address
This is required when the transfer method is TFTP. It is the IP address or domain name (if DNS is config-
ured) of the TFTP server.
TFTP Server Filename
This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the
upgrade code.
Transfer Status
This appears when TFTP is used. It displays the status of the transfer as it happens. Any error or success
message will be displayed here.