Configuring wan settings, Dslam type, Layer one interface – ADTRAN 600 Series User Manual
Page 27: Layer two protocol, Atm config, Rqiljxulqj :$1 6hwwlqjv, 6/$0 7\sh, D\hu 2qh ,qwhuidfh, D\hu 7zr 3urwrfro, 70 &rqilj
Advertising
Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B
Page 27
© 2002, ADTRAN, Inc.
Total Access 600 Series User Manual
Configuring WAN Settings
>DSLAM Type
Set this to the type of DSLAM the Total Access 600 will be connecting to.
>Layer One Interface
This is the physical layer protocol used to connect the DSLAM to the Total Access 600.
>Layer Two Protocol
This is the data link layer protocol used to connect the DSLAM to the Total Access 600.
>ATM Config
Use the
:
$1
menu (Figure 6) to access the
$70 &
21),*
menu.
Figure 6. WAN Menu
Advertising