ADTRAN 600 Series - Manual (Page 68)

Total Access 600 Series User Manual © 2002, ADTRAN, Inc.
Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B
Page 68
..
IP Routing
Step Action
1
From the Total Access 600 main menu, select the W AN menu. (Here
you set up the ATM network.)
2 Select the ATM C ONFIG menu.
3 Enter the I DLE C ELLS format for your network.
4 Set D ATA S CRAMBLING appropriately for your network.
5
Back all the way out to the top level Total Access 600 menu, and then
select the R
OUTER menu.
6
Select C ONFIGURATION .
From the C ONFIGURATION menu, you will set up addresses for your LAN
and WAN.
For basic IP routing, use all the default values from the G LOBAL menu.
7
From the E THERNET menu, enter the IP menu to enter your LAN
configuration.
8
Enter your LAN IP ADDRESS , S UBNET M ASK , and D EFAULT G ATEWAY
information.
For this example, the IP ADDRESS is 192.168.1.2, the S UBNET M ASK is
255.255.255.0, and the D EFAULT G ATEWAY is 10.25.4.10.
9
Arrow back to the main R OUTER C ONFIGURATION menu, and select the
WAN menu and then the ATM menu. (Here you will enter your data
PVC information.)
10
Create a new PVC by entering the menu. Enter your VPI and VCI
values.
11
From the RFC1483 IP menu, enter your LAN information.
For this example, the F AR E ND IP ADDRESS is 10.25.4.9, the IP
N ETMASK is 255.255.255.252, and the L OCAL IP ADDRESS is 10.25.4.10.
12
Arrow back to the top level Total Access 600 menu to activate your
changes.