Sys log host, Ppp log, Connection log – ADTRAN 600 Series User Manual
Page 46: Network log, Active, Wrap, Level, View, Clear, 6\v orj +rvw
Total Access 600 Series User Manual
© 2002, ADTRAN, Inc.
Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B
Page 46
Sys log Host
Set this to the IP address or domain name (if DNS configured) of the sys log host device. All log events are sent to this
device.
PPP Log
Information pertaining to the PPP negotiation and authentication is logged in the PPP log.
Connection Log
Information pertaining to the call placement and answering is logged in the Connection log.
Network Log
Information pertaining to routing protocols is placed in this log.
Each log (PPP log, Connection log, and Network log) contains the following elements.
Active
When set to
<
(6
(def), PPP events below or equal the log level are logged into the log.
Wrap
When set to
<
(6
(def), new PPP events will overwrite old PPP events when the log is full. All logging
will stop when the log is full and set to
1
2
.
Level
In order to log events, they must be at or below this level. Range is 0 to 6. The default is 3.
View
This menu displays the log list. The fields are as follows:
Clear
This clears the log when activated.
D
ATE
/T
IME
Date and time event occurred.
L
EVEL
Level associated with this event (0-6).
M
ESSAGE
Text message for this event. If message is too
long to fit on the line, another event appears
below it continuing the message.