KROHNE OPTISONIC 3400 EN - Manual (Page 134)

9
DESCRIPTION OF HART INTERFACE
134
OPTISONIC 3400
www.krohne.com 11/2013 - 4002037702 - HB OPTISONIC 3400 -en-R02
Status Display
Status Simulation <Enable/disable
status simulation>
Simulation values Opt
Status Simulation
Active
Rd
<Simulation Values> Opt
Process Rd Mapping Rd
Configuration Rd Mapping Rd
Electronics Rd Mapping Rd
Sensor Rd Mapping Rd
Status Mapping Process
Configuration
Electronics
Sensor
...
<Reset to default>
Simulation
Process Input <Simulation Volume Flow> / <Simulation Velocity of Sound>
Input/Output <Simulation A> / <Simulation B> / <Simulation C> / <Simulation D>
Actual Values
Flow
Volume Flow Rd / Mass Flow Rd / Flow speed Path 1 Rd / Flow speed Path 2 Rd, Opt / Flow
speed Path 3 Rd,Opt
Velocity of Sound
VoS Path 1 Rd / VoS Path 2 Rd, Opt / VoS Path 3 Rd, Opt
Gain
Gain Path 1 Rd / Gain Path 2 Rd, Opt / Gain Path 3 Rd, Opt
Signal to Noise Ratio
SNR Path 1 Rd / SNR Path 2 Rd, Opt / SNR Path 3 Rd, Opt
Other
Operating hours Rd / Date Rd / Time Rd
Information
Information
C number Rd /
<Sensor Electronics>
<Electronic Revision>
Sensor Revision Rd
Test/Reset
Test/Reset <Reset Errors>
<Warmstart>
<Device reset>
<Reset Configuration Changed Flag>
<Read GDC Object> Opt
<Write GDC Object> Opt
Table 9-3: Designations; Designations; Designations; Designations;
Opt ; Optional, depent on device implementation / configuration
Rd ; Read-only