KROHNE OPTISONIC 3400 EN - Manual (Page 20)

3
INSTALLATION
20
OPTISONIC 3400
www.krohne.com 11/2013 - 4002037702 - HB OPTISONIC 3400 -en-R02
3.6 Installation conditions
3.6.1 Inlet and outlet
3.6.2 Bends in 2 or 3 dimensions
3.6.3 T-section
Figure 3-3: Recommended inlet and oulet
1 Refer to chapter "Bends in 2 or 3 dimensions"
2 ≥ 3 DN
Figure 3-4: 2 and 3 dimensional bends, in front of flowmeter
1 Bends in 2 dimensions: ≥ 5 DN; bends in 3 dimensions: ≥ 10 DN
Figure 3-5: Distance behind a T-section
1 ≥ 5 DN