KROHNE ALTOSONIC V EN - Manual (Page 17)

ALTOSONIC V
Operating Manual rev02 E 7.30850.34.00 Page 17 of 106
4.1 Main menu: F1 Main window
The Main window is the default start-up window. This window shows an overview of the system and
can always be accessed by function key F1.
Explanation of the Main window layout:
UFC-DATA shows:
•
Raw data of the 5 channels regarding flow % and Velocity Of Sound (V.O.S.)
•
A red marker (
▪
) per channel shows an active channel failure, a green marker (
▪
) shows a
previously occurred channel failure
CONDITIONS show:
•
Temperatures, pressures and densities measured or calculated for the conditions of Proces,
Standard, Densitometer. Body temperature is also included.
• A red marker ( X ) in front of a parameter shows an alarm for out of range or manual on-line
override, a green marker ( X ) shows a previously occurred alarm
UFP-CALC shows:
•
Flow rates at Proces conditions, Standard conditions and Mass
.
RESETABLE TOTALISERS shows:
•
The forward, reverse and summation of the Totaliser values at Proces conditions, Standard
conditions and Mass.
•
The resetable totalisers can be reset in the Control menu (through F9 in main): F8 RES-TOT.
It is also possible to reset the totalisers by digital input signal or Modbus boolean.
NON RESETABLE TOTALISERS shows:
•
The forward, reverse and summation of the Totaliser values at Proces conditions, Standard
conditions and Mass.