KROHNE ALTOSONIC V EN - Manual (Page 67)

ALTOSONIC V
Operating Manual rev02 E 7.30850.34.00 Page 67 of 106
6.6 Printer status
Printer status
(status window text)
As a value on
Modbus Explanation
Ready 0 Ready for printing
Fail 1 If printer failed during print job
Busy
Check
2
2
During print job
If no print job, check if printer is connected and ready
Off 3 If printer is not found after Check
6.7 Printer task status
Printer status
(status window text)
As a value on
Modbus Explanation
NON 0 No print job
BUSY 1..2 Attempt first character
Xxxs …0s
Timeout print management
Value in seconds counting
down, if 0 then status to
RESET
3 Getting acknowledge if printer is taking print job.
For multiple UFP’s connected by a printer switch to 1
serial printer. Timeout print management can be set in
COMS0300.dat under section 2.9
BUSY 4..98 Printing headers
Progress counter as
percentage 0…100
99 Successful printing ticket
CONFIRM 100 Ready to confirm print job, see batch status CONFIRM
RESET 101 Ready for reset command on batch status RESET