KROHNE MFC 300 EN - Manual (Page 157)

DESCRIPTION OF HART INTERFACE
9
157
MFC 300
www.krohne.com 02/2012 - 4000498602 - MA MFC 300 R03 en
9.9.2 Operation
Due to PDM requirements and conventions, there are differences when operating the signal
converter with PDM and operating using the local keyboard. The online help for each parameter
contains its function number as a reference to the local device display.
Parameter protection for custody transfer and the service menu is the same as on the device's
local display. Other specific protective functions such as the passwords for the quick setup menu
and the setup menu are not supported with HART
® .
9.9.3 Parameter for the basic configuration
The counter measurements and the diagnosis values can be set directly in the PDM offline table.
The dependent unit parameters are automatically updated. However, automatic updating is not
possible in online dialogues of the PDM parameter table.
INFORMATION!
For more detailed information see Appendix C, Menu tree for PDM.
.book Page 157 Monday, February 6, 2012 11:01 AM