KROHNE MFC 300 EN - Manual (Page 29)

ELECTRICAL CONNECTIONS
4
29
MFC 300
www.krohne.com 02/2012 - 4000498602 - MA MFC 300 R03 en
4.4.1 Connection of signal cable, field housing
1 Remove the locking screw and open the housing cover.
2 Pass the prepared signal cable through the cable entry.
3 Secure the signal cable using the clip.
4 Connect the electrical conductors as shown. The shielding is connected to terminal S.
5 Close the housing cover and secure it with the locking screw.
Figure 4-1: Electrical connection of the signal cables, field housing
a = white
b = green
c = black
d = red
INFORMATION!
Each time a housing cover is opened, the thread should be cleaned and greased. Use only resin-
free and acid-free grease.
Ensure that the housing gasket is properly fitted, clean and undamaged.
.book Page 29 Monday, February 6, 2012 11:01 AM