KROHNE MFC 300 EN - Manual (Page 7)

SAFETY INSTRUCTIONS
1
7
MFC 300
www.krohne.com 02/2012 - 4000498602 - MA MFC 300 R03 en
Safety instructions
1.1 Software History
The "Electronic Revision" (ER) is consulted to document the revision status of electronic
equipment according to NE 53 for all GDC devices. It is easy to see from the ER whether
troubleshooting or larger changes in the electronic equipment have taken place and how that
has affected the compatibility.
Changes and effect on compatibility
1 Downwards compatible changes and fault repair with no effect on operation (e.g. spelling
mistakes on display)
2-_ Downwards compatible hardware and/or software change of interfaces:
H HART ®
P PROFIBUS
F Foundation Fieldbus
M Modbus
X all interfaces
3-_ Downwards compatible hardware and/or software change of inputs and outputs:
I Current output
F, P Frequency / pulse output
S Status output
C control input
CI Current input
X all inputs and outputs
4 Downwards compatible changes with new functions
5 Incompatible changes, i.e. electronic equipment must be changed.
INFORMATION!
In the table below, "x" is a placeholder for possible multi-digit alphanumeric combinations,
depending on the available version.
Release date Electronic Revision Changes and
compatibility Documentation
2006-11-06 ER 3.1.0x
(SW.REV. 3.10 (2.21))
- -
2006-12-12 ER 3.1.1x
(SW.REV. 3.11 (2.21))
1; 2-P; 2-M MA MFC 300 R02
2007-02-07 ER 3.1.2x
(SW.REV. 3.11 (2.21))
1; 2-M MA MFC 300 R02
2007-03-12 ER 3.1.3x
(SW.REV. 3.11 (2.21))
1; 2-H MA MFC 300 R02
2007-06-27 ER 3.1.4x
(SW.REV. 3.11 (2.22))
1 MA MFC 300 R02
2007-04-02 ER 3.2.0x
(SW.REV. 3.20 (2.22))
1; 2-X; 2-P; 2-F MA MFC 300 R02
2007-05-04 ER 3.2.1x
(SW.REV. 3.20 (2.22))
1 MA MFC 300 R02
2007-05-25 ER 3.2.2x
(SW.REV. 3.20 (2.22))
1; 3-I MA MFC 300 R02
.book Page 7 Monday, February 6, 2012 11:01 AM