NSi Industries DZM200A User Manual
Page 11
Select the day(s) and/or season(s) in which you
want the indicated channel to turn ON at sunset.
This is done in the same way as section 6.3 “a.”
and 6.3 “b.” using DAY key and SELCT key.
If you want the load to come on after or before
sunset, you use the OFFSET key. A
÷
sign before
the last 2 digits means the load comes ON that
many minutes after sunset. A
–
sign means the
load comes ON that many minutes before sunset.
Once desired DAYS/SEASON and OFFSET is set
press ENTER.
Now display shows SUNRISE time along with all
days and seasons displayed.
ALL DAYS TURN OFF AT SUNRISE whether or
not those days were astro selected.
In this mode you can only set OFFSET for sunrise.
If you want the load to turn OFF before or after
sunrise, you use the OFFSET key. A
÷
sign
before the last 2 digits means the load turns OFF
that many minutes after sunrise. A
–
sign means the
load turns OFF that many minutes before sunrise.
Unit displays CH and ASTRO along with LATITUDE.
If channel 2 is to be astronomic, press SELCT key
to advance to CH2. Press ENTER. Repeat section
7.1. If the latitude was set in CH1, it will appear
again and need
NOT be changed.
7.2 ASTRONOMIC ON, TIME OFF AND/OR
TIME ON, ASTRONOMIC OFF
Set astronomic ON/OFF per section 7.0 and 7.1
12
1
CH
MO
OFF
TU
WE
TH
FR
SA
SU
H
A
CH
1 2 3 4
SEASON
To set a time OFF during the night and/or a time
ON before sunrise, proceed as follows:
Press MODE key until schedule 01 appears
Press ENTER key repeatedly until the next blank
schedule screen appears. Use SELCT key to
select Channel 1 or Channel 2 (whichever one is
to be set for time ON or OFF during the night).
Set the hours, minutes, and days per sections 6.2 and
6.3. You can first set an OFF during the night and use
the next blank schedule screen to set an ON before
dawn.
8.0 REVIEW MODIFY AND DELETE
Use MODE key to advance to any of the following
MODES:
1. CLOCK MODE: Use HOUR, MIN, and DAY
keys to modify existing settings. Press ENTER.
2. DATE MODE: Use MONTH, DATE, and YEAR
keys to modify existing settings. Press ENTER.
3. DST
Daylight Saving is automatic. You do
not have to enter start and stop dates. Unit cal-
culates 1st Sunday of April and last Sunday of
October. You do not have to remember to
change every year. To eliminate, press
ON/OFF key to OFF. Press ENTER.
4. SEASON MODE: Seasons duration can be
changed or deleted. Press MONTH and DATE
keys or DLETE key. Press ENTER to confirm.
5. HOLIDAY MODE: Similar procedure as above
can be used for the holidays. Press ENTER.
13
SCH