NSi Industries DZM200A - Manual (Page 14)

6. SCHEDULE MODE: Schedule review, modify,
delete. You can modify the schedule entry using
HOUR, MIN, ON/OFF key and SELCT key. Press
ENTER after each modification.
To delete, simply press the DLETE key when
unwanted information is on display. This will
blank the entry. Press ENTER to confirm. Do
not leave the MODE without pressing ENTER.
7. ASTRO MODE: Press LAT key to change latitude.
Press ENTER. Press DAY key and SELCT key to
add or delete days in the sunset mode. Press OFF-
SET key to change offset time for sunset or sunrise.
Press ENTER after each.
8. RUN MODE: Time and day is displayed. If today
is a programmed holiday, the H will be displayed
steady. If today falls within a programmed sea-
son, that season # will be displayed.
9.0 OVERRIDE
OVR1 and OVR2 (override keys) are effective only
in the run mode.
The present load status of the channel will change
until the next scheduled event. The LED will indicate
whether the load is ON or OFF.
NOTES:
1.
Unit will go to RUN MODE automatically if no key
is pressed for five minutes.
2. Units do not have look back feature. If you have
just finished setting the unit and an output is to be
presently ON, press the OVR key to turn it 0n. Unit
will automatically pick up the regular schedule
thereafter.
14
3. Units do not have stagger start.
4. Clear all memory. All memory can be cleared
using the following procedure: while in the RUN
mode, press Enter key, display shows:
Use ON/OFF key to display:
Now press ENTER briefly and everything in the
timer memory is wiped off including real time and
date.
15
OFF
ON