NSi Industries DZS100BP - Manual (Page 10)

Display will show:
N OT E :
Sunset Time will be based on Date and Latitude
entered.
Press ENTER. The display will show:
If an offset to sunset time is required, press HOUR
and MIN. Offset can be set to 4 hours and 59 min-
utes max. Press EVENT to select + or – and then
press ENTER.
NOTE: A + sign will turn load ON that many hours
and/or minutes after sunset. A - sign will turn load
ON that many hours and/or minutes before sunset.
The display will show:
Press SELCT and then ENTER to activate sunrise
time.
NOTE: To turn load OFF at a preset OFF time, leave
this field bank. Press ENTER. The display will show:
9
7.1 SETTING HOURS AND MINUTES
a. Press HOUR and MIN to set desired time.
b. Press EVENT to set desired event.
7.2 SETTING DAYS, HOLIDAY AND SEASONS
Press SELCT to select the flashing desired days,
holiday and/or seasons, otherwise press DAY to
skip and then press ENTER. To delete entry, press
DAY until previously selected entry flashes, press
SELCT and then press ENTER.
The display will show:
Follow the same procedures above to set more
schedule entries for channel 1.
8.0 TO SET ASTRONOMIC SCHEDULE
(FOR DZS MODELS ONLY)
Press MODE until display shows:
Press the LAT key to advance to the desired degree
of latitude, from 0° to 60° north or 0° to 60° south.
Press ENTER.
8.1 SELECTING ASTRO DAYS
Press SELCT to select desired days, holiday and/or
seasons in which you want the load turn ON at sun-
set and then press ENTER.
8
DTS100B - DZS100BP 3/8/07 9:31 AM Page 19