NSi Industries DZS100BP - Manual (Page 6)

- The unit will display the model # and the rev. # ,
fo l l owed by :
NOTE: Make sure Memory Mod\ule with program is
inserted in the unit.
This will prepare the unit to read schedule settings
from the inserted Memory Module. Press EVENT
key, display will show:
This will read the schedule settings from the insert-
ed Memory Module. Press ENTER. Display will
show:
This will prepare the schedule settings to be copied
to next Memory Module. Remove inserted Memory
Module and insert Memory Module to be copied.
Press EVENT key, display will show:
Press ENTER. Schedule settings will be copied to
the current Memory Module and the unit will display:
13
1.0 TO SET THE CLOCK
Press HOUR and MIN to advance to the present
hour and mins. Check AM/PM, and press ENTER.
1.1 TO MODIFY CLOCK
Press MODE until the display shows: CLK. Press
HOUR and MIN. to modify clock and press ENTER.
2.0 TO SET DATE
If you are setting for the first time, display will show:
Press MONTH, DATE, and YEAR key to advance to
the desired month, date and ye a r, then press
ENTER. NOTE: The day of the week will be auto-
matically set once the date is set.
2.1 TO MODIFY DATE
Press MODE until the display shows DATE. Press
MONTH, DATE and YEAR to modify present set-
tings and then press ENTER.
3.0 DAYLIGHT SAVING TIME
After setting or modifying the date, display will show:
N OT E : If daylight saving time (DST) is NOT
required, press MODE, display will show:
4
DTS100B - DZS100BP 3/8/07 9:27 AM Page 11