Thermo Fisher Scientific Alpha COND 550 - Manual (Page 17)

Instruction Manual
Alpha-
COND 550
11
2.5.2 Key Functions
ENT
ESC
Conductivity Monitor
lpha COND550
CAL
Key Description
CAL Enter Calibration mode
ENT
Enter Setup mode
Access sub screens (parameters) within a group of settings in Setup
mode
Confirm (save) setup parameters and numerical values
Start/Confirm calibration in Calibration mode.
Select a group of settings in Setup mode.
Select parameters and increment/decrement numerical values in Setup
and Calibration modes.
(When pressed continuously, speed of value increment/decrement
increases)
Returns to Measurement mode when both keys are pressed
simultaneously.
Units of Measurement Indicators
mS Conductivity in Milli Siemens
µS Conductivity in Micro Siemens
R. Line Resistance in Ohms (Refer Section 5.5)
% Temperature Coefficient (Refer Section 5.2)
ºC Temperature in Celsius (Refer Section 5.3)
ºF Temperature in Fahrenheit (Refer Section 5.3)