West Control Solutions TB 45 Temperature Monitor - Manual (Page 34)

7.2 Configuration
Dependent on instrument version and configuration settings, display of values which are not required is suppressed.
µ The entries marked with this symbol are selectable only, if the instrument option is fitted.
Functions Func
Name Value range Description
Fnc.1 Function 1
0 Standard (measured value = INP1)
2 The measured value is calculated as the difference of the two values (INP1 - INP2). µ
3 Maximum value of INP1 and INP2. The higher one of the two values is used. With sen-
sor error, the remaining value is used.
µ
4 Minimum value of INP1 and INP2. The smaller one of the two values is used. With
sensor error, the remaining value is used. µ
7 O2 function with constant sensor temperature. The unit for the O2 settings can be
checked in Others ->
Parameter unit (ppm / %). The sensor temperature must be speci-
fied in Parameters -> Controller (version-dependent: Function) -> Probe temperature.
µ
8 O2 function with measured sensor temperature. The sensor temperature as a second
measured value INP2 is required. The unit for the O2 settings must be checked in Ot-
hers -> Parameter unit (ppm / %).
µ
Inputs InP.1 and InP.2 (
µ)
Name Value range Description
I.Fnc Input function ( µ with 2nd universal input only )
0 No measurement
1 measurement
S.tYP Sensor type
0 Thermocouple type L (-100...900°C), Fe-CuNi DIN
1 Thermocouple type J (-100...1200°C), Fe-CuNi
2 Thermocouple type K (-100...1350°C), NiCr-Ni
3 Thermocouple type N (-100...1300°C), Nicrosil-Nisil
4 Thermocouple type S (0...1760°C), PtRh-Pt10%
5 Thermocouple type R (0...1760°C), PtRh-Pt13%
6 Thermocouple type T (-200...400°C), Cu-CuNi
7 Thermocouple type C (0...2315°C), W5%Re-W26%Re
8 Thermocouple type D (0...2315°C), W3%Re-W25%Re
9 Thermocouple type E (-100...1000°C), NiCr-CuNi
10 Thermocouple type B (0/100...1820°C), PtRh-Pt6%
18 Special thermocouple (linearization necessary)
20 Pt100 (-200.0 ... 100,0 °C) (150°C with reduced lead resistance)
21 Pt100 (-200.0 ... 850,0 °C)
22 Pt1000 (-200.0...850.0 °C)
23 Special 0...4500 Ohm (preset KTY11-6)
24 Special 0...450 Ohm
25 Special 0...1600 Ohm
26 Special 0...160 Ohm
30 0...20mA / 4...20 mA
40 0...10V / 2...10 V (Inp.1 only)
41 Special (-2,5...115 mV)
42 Special (-25...1150 mV)
43 Special (-25...90 mV)
44 Special (-500...500 mV)
45 Special (-5...5 V) (Inp.1 only)
46 Special (-10...10 V) (Inp.1 only)
Configuration level
34 Configuration TB 45