West Control Solutions TB 45 Temperature Monitor - Manual (Page 38)

Name Value range Description
dELY 0...200 Response delay [ms]
µ
S.IF Enable system interface µ
0 The system interface is de-activated.
1 The system interface is activated (field bus communication via bus coupler).
D.Unt display unit
0 no unit
1 temperature unit
2 O2 - unit (see date O2)
3 %
4 bar
5 mbar
6 Pa
7 kPa
8 psi
9 l
10 l/s
11 l/min
12 Ohm
13 kOhm
14 m
15 A
16 mA
17 V
18 mV
19 kg
20 g
21 t
22 Text of physical unit (definable in T.Unit/controllable via BlueControl
Ò)
O2 parameter unit for O2 µ
0 Parameter in ppm with O2 function
1 Parameter in % with O2 function
Unit Temperature-unit
0 no unit
1 °C
2 °F
3 Kelvin
dP decimal points
0 no decimalpoint (0 digits behind the decimal point)
1 1 digit behind the decimal point
2 2 digits behind the decimal point
3 3 digits behind the decimal point
C.dEl
0..200 Modem delay [ms]
FrEq Switch over 50/60 Hz (only visible with BlueControl
Ò
!)
0 Netfrequency 50 Hz
1 Netfrequency 60 Hz
IExo Block extended operating level (only visible with BlueControl
Ò
!)
0 Released
1 Blocked
IRES LC alarm reset via the keys can be protected additionally by means of a password.
0 Enabled
1 Disabled
Pass OFF...9999 Password (only visible with BlueControl
Ò
!)
IPar Block parameter level (only visible with BlueControl
Ò
!)
0 Released
1 Blocked via passnumber
Configuration level
38 Configuration TB 45