West Control Solutions CALogix - Manual (Page 14)

CALogix-sw Configuration Software
STARTING CALOGIX-SW
1. Click ‘start’ on Windows toolbar
2. Mouse-over ‘all programs’
3. Mouse-over ‘CALogix folder’ in menu
4. Click on ‘CALogix’ icon
5. CALogix program should now run
CONNECTING TO A CONTROLLER
1. Click on to add a new instrument
2.
Click on browse
3. Select communications port, baud rate and Modbus address (default 1). Once settings are entered click on
browse.
4. CALogix unit is then shown in device list when detected. Click on OK.
.
5. Window now opens showing CALogix unit with data on installed modules
THE CALOGIX-SW TOOLBAR
New meter (visible when no controller open)
Search for a CALogix system on a network.
New device (visible when controller open)
Access a different CALogix base-unit.
Page 14 of 44