Airedale SmartCool 11-233kW - Manual (Page 59)

Precision Air Conditioning SmartCool
TM
– D
Precision Air Conditioning
59
Installation, Maintenance and Commissioning Manual :6877419 02/2013
Use Of Extra Functions Buttons
+ + UP + DOWN+
ENTER
Allows users to change the display address
+
ALARM +
ENTER
Allows access to controller system information.
+
ALARM + UP
Allows access to change controller address (only when display
address is zero)
Esc
+
ESC + ENTER Allows the user to switch between the preinstalled languages
Prg
+
PRG + ENTER Temporarily displays the address of the controller.
+
ENTER + UP Change unit on remote display keypad.
Navigation
Initially, use the
Prg
button to access the main navigation menu, the cursor will appear in the top right hand corner
with
the first menu UNIT ON/OFF selected.
Use the and buttons to move to the desired menu. The selected menu will be shown in BLOCK CAPITALS.
Press to enter the selected menu.
Navigation Sub Menus
There are eight sub menus available from the main navigation menu, these are listed below:
1. Unit On/Off Allows the user to switch on or switch off the unit.
2. Maintenance
Allows the user to view maintenance related parameters, such as hours run,
sensor calibration and manual overrides.
3. Alarm Log Allows the user to view the alarm log.
4. Input/Output Allows the user to view the status of the controller inputs and outputs.
5. Clock
Allows the user to view the current time, date and day of the week. On/Off and
temperature time zones can also be set.
6. Set point Allows the user to adjust the return air temperature set point.
7. User
Allows the user to adjust user related parameters, such as high and low alarm
limits and temperature bands.
8. Manufacturer
Allows the user to enter the manufacturer menu and adjust various
manufacturer related parameters, such as unit configuration and timing
settings.
C
on
tro
ls