Badger Meter B2800 - Manual (Page 8)

USE CARE TO PREVENT DIRT, GRIT OR OTHER FOREIGN MATERIAL FROM LODGING ON THREADS. IF SUCH MATERIAL
SETTLES ON THREADS, CLEAN WITH KEROSENE OR STODDARD SOLVENT*, THEN RE-LUBRICATE WITH COOPER
CROUSE-HINDS TYPE STL THREAD LUBRICANT.
8 Tighten cover set screws to prevent cover from loosening under vibration
* TO AVOID THE POSSIBILITY OF AN EXPLOSION, OXIDATION AND CORROSION, DO NOT USE GASOLINE OR SIMILAR
SOLVENT.
TO MAINTAIN THE EXPLOSION PROOF INTEGRITY OF THE ENCLOSURE WITH A SCREW IN A TAPPED MOUNTING PAD
HOLE, THERE MUST BE A MINIMUM OF 1⁄16 INCH OF MATERIAL BETWEEN THE DRILL POINT AND THE BACK WALL. IF
FOR ANY REASON A SCREW WILL NOT BE THREADED INTO THE DRILLED HOLE, A MINIMUM OF 1⁄8 INCH OF MATERIAL
MUST REMAIN BETWEEN THE DRILL POINT AND THE BACK WALL.
Flow Monitor, B2800XP Explosion Proof Monitor – Simplified
Page 8 November 2013