Badger Meter Turbine Flow Meters (Hydraulic Fluids) - Manual (Page 6)

Turbine Flow Sensor
Installation & Operating Instructions
Page 6 03/12 Form No. 05-TUR-UM-00194
III. SPECIFICATIONS
Activa™ and Ultima Sensor Arrays
Material
Housing: 6013-T651 Anodized aluminum
Turbine Rotor: T416 Stainless steel
Rotor Supports: 6061-T6 Aluminum,
C360 Brass for ¼" models
Rotor Shaft: T303 Stainless steel
Ball Bearings: 440 C Stainless steel
Hub Cones: 6061-T6 Aluminum alloy
Retaining Rings: 6061-T6 Aluminum alloy
Adapters/Plugs: 6061-T6 Anodized aluminum
Seals: Buna N standard
Viton® and EPR optional
Magnetic Pick-up:
Body T303 Stainless Steel
Nut T303 Stainless Steel
IFC (Intelligent Frequency Converter), Activa only:
Body 6061-T6 Aluminum, nickel plate
Connector Brass, nickel plate
Temperature Probe: 12L14 Steel, electroless nickel finish
Pressure Sensor:
Case 300 Series stainless steel
Diaphragm 17-4 PH stainless steel
Ports:
SAE Straight thread O-ring boss, female, J1926/1;
ISO1179 (BSPP)
Dimensions See Appendix, page 16
Model Number Information
Performance
Flow Accuracy:
Activa ±1% of reading @ 32 cSt
Ultima ±1% of full scale
Repeatability: ±0.2%
Pressure Rating: 5800 PSI (400 Bar) maximum,
5000 PSI (345 Bar) maximum for 1-¼" models
Pressure Drop: See ∆ P charts on page 17
Turbine Response: ≤200 ms
Fluid Temperature: -4 to +300 °F (-20 to +150 °C)
Ambient Temperature: -4 to +131 °F (-20 to +55 °C)
Electrical
Activa 4-20 mA 0-5 VDC
Power: Loop-powered, 6V 10-26 VDC
insertion loss max
10-30 VDC supply
Inputs: Mag pick-up Mag pick-up
Frequency 0-3500 Hz 0-3500 Hz
Trigger
Sensitivity 30 mV p-p 30 mV p-p
Freq Meas Accuracy ±1% ±1%
Analog Out: 4-20 mA current loop 0-5 VDC
Resolution 1:4000 1:4000
Temp Drift 50 ppm/°C max 50 ppm/°C max
Environmental:
Ambient Temp -22 to +158 °F -22 to +158 °F
(-30 to +70 °C) (-30 to +70 °C)
Humidity 0-90% 0-90%
non-condensing non-condensing
Ultima
Magnetic Pick-up: Self-generating alternating pulse;
100 mV RMS (100 Hz) minimum.
F6202 & F6222 only 10 mV RMS (200Hz) minimum
Calibration
Flow sensors are calibrated with 0.876 specific gravity, 140
SUS (32 cSt) hydraulic oil. Standard calibration is done using
3-points and is traceable to NIST, ISO 9001/ANSI Z540-1 & MIL-
STD 45662A.
Nominal
Port Size
Flow Rate Model
IFC Converter
or Mag Pick-up
Seals
Sensor Ports
Temperature Pressure
SAE 8 0.4 - 7 GPM F6202
Activa Models:
AI 4-20 mA Out
AV 0-5 VDC Out
Ultima Models:
F Frequency Out
B Buna N
V Viton
E EPR
T with Sensor
N ¼ NPT(F)
Plugged
S SAE 2 Plugged
G G ¼ Plugged
D SAE 4 Plugged
1 1000 PSI
3 3000 PSI
5 5000 PSI
6 6000 PSI *
N ¼ NPT(F)
Plugged
S SAE 2 Plugged
F G ¼ Plugged
* Not available with
Models F6208 or F6228
SAE 12 2 - 40 GPM F6204
SAE 16 4 - 80 GPM F6206
SAE 20 8 - 160 GPM F6208
G ¼ 1.5 - 26 LPM F6222
G ¾ 7.5 - 151 LPM F6224
G 1 15 - 302 LPM F6226
G 1-¼ 30 - 605 LPM F6228
Examples:
F6204-AIB-T6 = SAE 12 ports, 2-40 GPM flow range
Buna N seals, Temperature sensor
6000 PSI (414 Bar) pressure sensor
F6208-FV-TN = SAE 20 ports, 8-160 GPM flow range
Viton seals, Temperature sensor
1/4 NPT (F) plugged pressure port